TEXTURE

Texture, the new series by Casamood, seduces the eye with an evolved style and transmits a natural inclination to beauty.

Certified
Quality
Learn more
TEXTURE

A delicate weave, details reaching the height of refinement and the power to release unsuspected aesthetic quality. The light patterns which emerge from the mix of the three colours in the range are reminiscent of the charm of a refined and ethereal atmosphere.

Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wet> 0,42 wet 
Slip resistance with shoesDIN-51130:2010-R9 
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to domestic chemicals and additives for swimming poolsISO-10545-13UB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA 
Resistance to high concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHA 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULA 
Resistance to stainingISO-10545-14-Cl. 3 
Maximum straightness deviation, in %, in relation to the corresponding production dimensionsISO-10545-2±0,5% (±1,5 mm)± 0,1% 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±5% (±0,5 mm)± 5% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME / CONFORMING / CONFORME / KONFORM / CONFORME 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)± 0,35% 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm)±0,15% 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensions±0,5% (±2 mm)± 0,2% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08% 
Bending strength in N/mm2ISO-10545-4>35 N/mm2average value 50 N/mm2 
Breaking strength in N (thickness >= 7,5 mm)≥1300 Newtonaverage value 3200 N 
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3average value 140 mm3 
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
GREENGUARD
LEED Texture