NEUTRA 6.0

A new version of the series that has marked the origin of the Casamood brand. After a successful decade Neutra has expanded its family to become an increasingly evolved container.

Certified
Quality
Learn more
NEUTRA 6.0

The palette is enriched with vibrant colours and oversized formats, coordinated stucco and painting enrich the proposed total look.

Print this page
Specification referenceE.N. 14411 . Appendix G. Group BⅠa. UGLTest methodReference valueDeclared value
Dynamic coefficient of friction (section 9.6 ANSI A 137.1 2012)DCOF>0,42 wet>0,42 wet  
Frost resistanceISO-10545-12Richiesta / Required / Requise / Gefordert / RequeridaRESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 
Resistance to high concentrations of acids and alkaliISO-10545-13Come dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteUHB 
Resistance to domestic chemicals and additives for swimming poolsUB minimo / UB minimum / UB minimum / UB mindestens / UB minimoUA 
Resistance to low concentrations of acids and alkaliCome dichiarato dal produttore / See manufacturer’s declaration / Selon déclaration du producteur / Entsprechend der Herstellerangaben / Tal como declara el fabricanteULB 
Resistance to stainingISO-10545-14-Cl. 3 
Maximum right-angle deviation, in %, in relation to the corresponding production dimensionsISO-10545-2±0,5% (±2 mm)± 0,2% 
Maximum straightness deviation, in %, in relation to the corresponding production dimensions±0,5% (±1,5 mm)± 0,1% 
Admitted deviation, in %, of the average thickness of each tile from the production dimensions±5% (±0,5 mm)± 5% 
Flatness (centre curvature / edge curvature / warpage)±0,5% (±2mm)± 0,2% 
Surface qualityIl 95% min delle piastrelle deve essere esente da difetti visibili / At least 95% of the tiles must be free from visible flaws / 95% min des carreaux ne doivent présenter aucun défaut visible / Mindestens 95% der Fliesen müssen frei von sichtbaren / mín. el 95% de las baldosas tiene que estar exento de defectos visiblesCONFORME / CONFORMING / CONFORME / KONFORM / CONFORME 
Length and width: admitted deviation, in %, of the average size of each tile from the production dimensions±0,6% (±2 mm)± 0,15% 
Amount of water absorbed, in percentageISO-10545-3E<0,5%average value 0,08% 
Breaking strength in N (thickness < 7,5 mm)ISO-10545-4≥700 Newtonaverage value 1350 
Bending strength in N/mm2>35 N/mm2average value 52 
Resistance to deep abrasion of unglazed tilesISO-10545-6<175 mm3average value 140 
Thermal shock resistanceISO-10545-9-RESISTE / RESISTANT / RÉSISTE / ERFÜLLT / RESISTE 

Notes

  • The data in the technical table does not apply to colours from 09 to 14.

     
Test methodReference valueDeclared value
Barefoot slip resistanceDIN-51097-Cl. A+B 
Resistance to low concentrations of acids and alkaliISO-10545-13-GLA 
Resistance to domestic chemicals and additives for swimming pools-GA 
Resistance to stainingISO-10545-14-Cl. 5 
Amount of water absorbed, in percentageISO-10545-3-< 0,5% 
Coefficient of thermal linear expansionISO-10545-8-< 7,5 
CE Neutra 6.0
LEED Neutra 6.0